信息来源: | 发布日期: 2013-03-02 00:00:00 | 浏览量:351496
爱立许混合技术与特定任务的外围干燥设备的混合制粒加热反应干燥行使对产品性能的更^的控制冷却的选择范围可以扩大。如混合,制粒,加热,反应,干燥,冷却,可以实现同时或...
爱立许混合技术与特定任务的外围干燥设备的混合制粒加热反应干燥行使对产品性能的更^的控制冷却的选择范围可以扩大。过程工程基本操作,如
混合,制粒,加热,反应,干燥,冷却,可以实现同时或之后其他的只是一台机器,
这是实现创新的爱立许的原始材料进行测试的技术,它可以在爱立许测试中心。
爱立许干燥技术的优点的总结:
Mixing Granulating Heating Reacting Drying Cooling
The range of options for exercising more accurate control over product properties can be broadened by supplementing the Eirich mixing technology with task-specific peripheral drying equipment. Fundamental process engineering operations such as
mixing, granulating, heating, reacting, drying, cooling can be implemented simultaneously or one after the other in just a single machine.
This is achieved with innovative Eirich technology which can be tested with the original materials at the Eirich test center.
Laboratory technology (including Ex-proof) for contact drying under atmospheric pressure and vacuum contact drying
Vacuum hot vapor dying in Evactherm® mixers operating in closed circuit mode with integrated evaporation cooling
Drying of aqueous material systems with hot air or flue gases
Emission-free drying (Ex-proof also available)
A summary of the advantages of Eirich drying technology:
Any consistency can be processed without problems – no need for pre-conditioning
No material build-up on heated walls or installed parts
Granulates with the highest densities/powder densities
Seals are not in direct contact with the product
Easy change of formulas with short start-up and stop times
Moisture and product quality adjustable over a wide range - from powdery to granular
钛酸锂盘式连续干燥机工作原理:湿物料自加料器连续地加到干燥器上部第一层干燥盘上,带有耙叶的耙臂作回转运动,使耙叶连续的翻炒…
三元复合材料盘式连续干燥机概述:1、盘式连续干燥机是一种高效的传导型连续干燥设备,其独特的结构和工作原理决定了它具有热效率…
氯化钴直线振动流化床干燥机概述:氯化钴(水合)是粉红色至红色结晶,无水物为蓝色。微有潮解性,易溶于水、乙醇、乙醚、丙酮和甘油…
二氟磷酸锂真空耙式干燥机概述:二氟磷酸锂真空耙式干燥机是一种传导传热干燥器。物料不直接与加热介质接触适用于干燥少量的、不耐…
草酸钴旋转闪蒸干燥机工作原理:旋转闪蒸干燥机中的热交换,主要以气流和颗粒,筒壁与颗粒的热交换为主。干燥过程的实质是水分的扩…
草酸亚铁闪蒸干燥机工作原理:热空气由入口管以切线方向进入干燥室底部的环隙,并螺旋状上升,同时,物料由加料器定量加入塔内,并…