TERMOMIX®真空桨叶干燥机/反应釜

TERMOMIX®真空桨叶干燥机/反应釜的目的是为Termomix monoproduction应用程序或批量的生产设备，搅拌机，反应釜，除尘器，烘干机。

支持两端提供良好的混合特性，与外部互换填料箱或机械密封的搅拌机。

经济和强大的多用机非常适合于重工业应用。

惰性气体

湿滤饼或淤浆输送到干燥器中之前与氮的含氧气氛中通过控制位移惰化容器内部。此过程可以防止可能形成在容器内的爆炸性气体环境。

填充

惰性化后完成从一个离心机或吸滤器，或依赖于应用程序浆料送入干燥器的湿滤饼。

当用作反应器中加入所需的固体和液体成分。该反应典型地发生在升高的温度和压力。
烘干

为了有效地进行干燥，干燥机通常是抽真空的步骤和在相同的时间加热。在干燥过程中，产品的搅拌。的干衣机的产品被保持在真空下，在^大允许温度，直到达到所需的^终产品的湿度水平。
冷却

干燥完成后的产品被冷却下来之前排出。
出料

将干燥和冷却后的产物被排出直通侧排出阀。该产品被输送到排出阀由搅拌器。

TERMOMIX® Paddle Dryer / Reactor

The Termomix® vacuum paddle dryer / reactor is intended for monoproduction applications or bulk production facilities as mixer, reactor, precipitator and dryer.

The agitator is supported on both ends providing excellent mixing characteristics, with externally interchangeable stuffing boxes or mechanical seals.

Economic and robust multipurpose machine well suited for heavy industrial applications.

Inerting

Prior to feeding wet cake or slurry into the dryer the vessel interior is inerted by a controlled displacement of the oxygen containing atmosphere with Nitrogen. This procedure prevents the potential formation of an explosive atmosphere in the vessel interior.

Filling

After inertization is completed wet filter cake from a centrifuge or Nutsche filter, or dependent upon the application slurry is fed into the dryer.

When used as a reactor the required solid and liquid components are added. The reaction typically takes place at elevated temperatures and pressures.
Drying

For efficient drying the dryer is typically evacuated in steps and heated up at the same time. During the drying process the product is agitated. The dryer is maintained under vacuum and at the maximum allowable temperature for the product until the final required product humidity level is reached.
Cooling

After drying is completed the product is cooled down prior to discharging.
Discharging

The dried and cooled product is discharged thru the side discharge valve. The product is transported to the discharge valve by the agitator.