瑞士WATROMAT各类污泥干燥机及运输系统概述

标准污泥干燥机

WATROMAT®批处理污泥脱水机使用干燥的空气，以减少滤饼污泥的重量和体积。污泥干燥WATROMAT®批处理污泥烘干机是中小型板框压滤机污泥滤饼的理想选择。滤饼污泥被填充到WATROMAT®干燥容器中，将用干空气干燥。干燥所有WATROMAT®容器集成的引爆系统。污泥干燥与WATROMAT®标准的污泥干燥机是维护穷人和无排放。

特点和优点
干60 - 4000公斤污泥/天
需要分钟。固含量为30％的干燥
使用00:33千瓦时电，每公斤分离出的水
达到90％的固体干燥

箱式污泥干燥机

WATROMAT®容器污泥脱水机半连续降低滤饼污泥的体积和重量与干燥后的空气在大跳过或钩升降机容器。 WATROMAT®容器污泥干燥机适用于大型板框压滤机污泥干化。站立在压滤机，滤饼将干燥污泥落入WATROMAT®干燥的跳动或WATROMAT®钩升降机容器和干燥。
WATROMAT®容器的污泥烘干机工作原理完全自动的，不需要任何处理，直到容器装满干污泥。

数字和功能
每个集装箱每天枯竭吨至20吨的污泥
需要分钟。 25％的固体干燥
使用00:33千瓦时电，每公斤分离出的水
达到90％的固体干燥

带式污泥干燥机

WATROMAT®带式污泥干燥机采用的烘干隧道和空调，空气干燥，减少污水污泥储存的体积和重量。 WATROMAT®带式污泥干燥机适用于污水污泥脱水带式压滤机离心机，沉降或螺旋压力机。污水污泥将被分配到一个穿孔带，慢慢地经过一个隧道污泥运，轻轻地干燥，干燥的空气条件。 WATROMAT®带式污泥干燥机在封闭系统中的无排放，无异味。

干污泥运输系统

WATROMAT®，干污泥装袋单元采用高压风机，干污泥输送到单向袋。空WATROMAT®干污泥的干燥容器不使用叉式起重适合干污泥装袋单元。污泥件要与真空无尘吸走。干污泥装袋机配备灰尘过滤器自清洁单元工作免维护。

特点和优点
从800 - 10,000公斤/小时的干污泥运输
替换叉车（SF800. SF1400）
降低存储量

Standard sludge dryer

WATROMAT® batch sludge dryer use dried air to reduce the weight and volume of filter cake sludge. Sludge drying with WATROMAT® batch sludge dryers is ideal for filter cake sludge from small and medium plate and frame filter presses. The filter cake sludge is filled into WATROMAT® drying containers and will be dried with dry air. All WATROMAT® drying containers have integrated tipping systems. Sludge drying with WATROMAT® standard sludge dryer is maintenance-poor and emission-free.

Features and benefits
Dry 60 – 4000 kg sludge/day
Needs min. 30 % dried solids
Use 0.33 kWh power per kg separated water
Reach 90 % dried solids

Container sludge dryer

WATROMAT® container sludge dryer reduces the volume and weight of filter cake sludge semi-continuously with dried air in big skips or hook lift containers. Sludge drying with WATROMAT® container sludge dryer suits for large plate and frame filter presses. The filter cake sludge fall into WATROMAT® drying skips or WATROMAT® hook lift drying containers and will be dried during standing under the filter press.
WATROMAT® container sludge dryers works fully automatic and don't need any handling till the container is filled with dried sludge.

Figures and features
Dries up to 20 t sludge per day per container
Needs min. 25 % dried solids
Use 0.33 kWh power per kg separated water
Reach 90 % dried solids

Belt sludge dryer

WATROMAT® belt sludge dryer uses a drying tunnel and conditioned dried air to reduce sewage sludge storage volume and weight. WATROMAT® belt sludge dryer is suited for sewage sludge dewatered by belt filter press, centrifuge, decanter or screw press. Sewage sludge will be distributed on a perforated belt, transported slowly through a sludge tunnel, and softly dried by conditioned dry air. WATROMAT® belt sludge dryer works in an emission free closed system and without odour.

Dry sludge transport system

WATROMAT® dry sludge bagging unit uses high pressure fan to transport dried sludge into one way bag. Dry sludge bagging unit is suited to empty WATROMAT® drying containers holding dry sludge without using a fork-lift. The sludge pieces will sucked away with a vacuum dust free. The dry sludge bagging unit is equipped with a self-cleaning dust filter unit that works maintenance free.

Features and benefits
Transports from 800 – 10,000 kg/hour dried sludge
Replaces fork-lift truck (SF800. SF1400)
Reduces storage volume